CV OF ENGINEERS

Md. Anisur Rahman Khan - Electrical Engineer

• B.Sc. Engineering (Electrical), First Class, BUET (Bangladesh University of Engineering and Technology).

• Over 36 Years of Experience.

• Major expertise in Assessing and Designing Electrical Plan for Commercial / Industrial buildings.

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Designed and specified Fire protection and Security Systems

• Expertise in Inspections to check compliance with codes and safety issues.

• Has worked in Bangladesh, Saudi Arabia, UAE & Libya.

Dabir U. Ahmed - Structural Engineer

• B. Sc. Engineering (Civil), BUET (Bangladesh University of Engineering and Technology).
  Over 32 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• Construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in Inspections to check compliance with codes and safety issues.

Adnan Ahmed - Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Chittagong University of
  Engineering & Technology.

• Designing Electrical Plan for Commercial / Industrial buildings.

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Automatic Short Circuit Tester.

• Design of a Single Phase Transformer.

• Implementation of Digital Logic Gate Using Microcontroller

• Microcontroller Based Smart Security System

• Expert in Inspections to check compliance with codes and safety issues.

Forhadul Hoque - Fire Fighting Engineer

• B. Sc. Engineering (Industrial Tech/Mechanical Engineering Technology) from the California State University, San Jose, California, USA.

• Over 26 Years of Experience.

• Designing of Fire Escape Plan for Commercial / Industrial buildings.

• Installing Fire Fighting system as per NFPA standard which are Fire Hydrant, Sprinkler (Pandant/upright) System up to the testing & commissioning.

• Ensures installation of adequate / required Fire Fighting equipment.

• Specification writing, equipment selection and vendor interface.

• Planning & scheduling, client interaction & support, project monitoring & reporting.

• Installation of Lift, HVAC & firefighting system.

• Preparation of design drawings, supervision of construction of Fire Fighting facilities, project supervision, completes installation.

• After field verification preparation of as built drawing, specification interpretation, design modification, scheduling, system inspection & testing.

• Expert in Inspections to check compliance with codes and safety issues.

• Has worked in Bangladesh, USA, UAE, KSA and QATAR.

Giasuddin Ahamed - Structural Engineer

• B. Sc. Engineering (Civil), Khulna University of Engineering & Technology.

• Over 32 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in Inspections to check compliance with codes and safety issues.

• Has worked in Bangladesh, USA, UAE, KSA and QATAR

Mahbubur Rahman Khan - Structural Engineer

• B. Sc. Engineering (Civil), DUET (Dhaka University of Engineering and Technology).

• Over 8 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• Construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in compliance with codes and safety issues.
   

Md. Habibullah - Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Chittagong University of Engineering & Technology.

• Drawing Electrical Plan for Commercial / Industrial buildings.

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Installing sub-stations

• Microcontroller Based Smart Security System

• Expert in compliance with codes and safety issues.

Md. Habibur Rahman - Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Chittagong University of Engineering & Technology.

• Drawing Electrical Plan for Commercial / Industrial buildings.

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Installing sub-stations

• Expert in compliance with codes and safety issues.

Md. Ahsan Habib - Structural Engineer

• B. Sc. Engineering (Civil), Khulna University of Engineering & Technology.

• Over 5 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in Inspections to check compliance with codes and safety issues.
   
   

Akbar Hossain - Fire Fighting Engineer

• B. Sc. Engineering from the University of Development Alternative, Dhaka, Bangladesh.

• Fire & safety training at Fire Service & Civil Defense Institute, Dhaka, Bangladesh.

• Over 4 Years of Experience.

•  Supervise the different fire project like as Automatic hydrant system, Fire alarm system, sprinkler system, FM-200 as per Drawing.

• Install the Manual and automatic fire detection systems as per National Fire Protection Association Standards (NFPA).

• Ensures installation of adequate / required Fire Fighting equipment.

• Technical resource for incident commanders by providing information concerning structural stability, hazardous materials, and fire protection components.

•  Provide presentations and training at various events concerning updates to codes and regulations.

• Conduct hydrant flow tests and maintain water supply data.

• Act as representative to various committees, technical associations, and professional.

• After field verification preparation of as built drawing, specification interpretation, design modification, scheduling, and system inspection & testing.

• Expert in Inspections to check compliance with codes and safety issues.

 
Arafat Ali Kawser - Fire Fighting Engineer

• Diploma in Fire Engineering, Major in Fire Safety from Institute of Fire and Safety Engineering, Nagpur, India.

• Over 3 Years of Experience.

• Ensures maintenance of adequate / required Fire Fighting equipment.

• Technical resource for incident commanders by providing information concerning structural stability, hazardous materials, and fire protection components.

• Conduct hydrant flow tests and maintain water supply data.

• Install the Manual and automatic fire detection systems as per National Fire Protection Association Standards (NFPA).

• After field verification preparation of as built drawing, specification interpretation, scheduling, and system inspection & testing.

• Expert in Inspections to check compliance with codes and safety issues.

 
Md. Mahmudul Hassan- Fire Fighting Engineer

• University Graduate, trained and Certified in Fire Fighting from Bangladesh Navy.

• Over 6 Years of Experience in Fire Fighting business.

• Technical resource for the Management for providing information concerning structural stability, hazardous materials, and fire protection components.

• Conduct hydrant flow tests and maintain water supply data.

• Ensures maintenance of adequate/required Fire Fighting equipment.

• Install the Manual and automatic fire detection systems as per National Fire Protection Association Standards (NFPA).

• Trains Company Management and relevant employees on Fire Safety Issues.

• Expert in Inspections to check compliance with codes and safety issues

 
Golam Bokhtier - Electrical Engineer

• M.Eng., Electrical Engineering from Iowa State University, College of Engineering, Ames, Iowa.

• Over 9 Years of Experience.

• Comprehensive experience with various phases of design, development, testing, verification and maintenance of the desired system

• Expertise in Assessing and Designing Electrical Plan for Commercial / Industrial buildings.

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expertise in Inspections to check compliance with codes and safety issues.

• Has worked in USA & Bangladesh.

 
Mahmudur Rahman - Structural Engineer

• B. Sc. Engineering (Civil) & Architecture, BUET (Bangladesh University of Engineering and Technology).

• Over 35 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• Construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in Inspections to check compliance with codes and safety issues.

• Has worked in Bangladesh, Canada, UAE & Libya.

Mohammad Shafiul Azam - Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Chittagong University of Engineering & Technology.

• Specification writing, equipment selection and vendor interface

• Automatic Short Circuit Tester.

• Design of a Single Phase Transformer.

• Implementation of Digital Logic Gate Using Microcontroller

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Microcontroller Based Smart Security System

• Installing sub-stations

• Expert in compliance with codes and safety issues.

Md. Mosarraf Hossain - Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Dhaka University of Engineering & Technology.

• Specification writing

• Equipment selection and vendor interface

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Installing sub-stations

• Expert in compliance with codes and safety issues.

 
Mohammad Munirul Alam - Electrical Engineer

• B. Sc. Engineering (Electrical), BUET (Bangladesh University of Engineering & Technology.

• Specification writing, equipment selection and vendor interface

• Design of safety system in industrial building.

• Electrical load calculation, designing of power structure.

• Automatic Short Circuit Tester.

• Implementation of Digital Logic Gate Using Microcontroller

• Testing the load capacity of the Main Switch Board.

• Installing Transformers

• Installing sub-stations

• Expert in compliance with codes and safety issues.

Ruhul Quddus - Structural Engineer

• B. Sc. Engineering (Civil), BUET (Bangladesh University of Engineering & Technology).

• Over 6 Years of Experience.

• Management and structural design of Commercial / Industrial buildings.

• Design & Construction Supervision

• Feasibility study and conceptual design

• construction works of concreting including quality control of materials

• Specification writing, equipment selection and vendor interface

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Expert in Inspections to check compliance with codes and safety issues.

 
Dhritiman Bhattacharya- Electrical Engineer

• B. Sc. Engineering (Electrical and Electronics), Chittagong University of Engineering & Technology.

• Specification writing, equipment selection and vendor interface

• Drawing Electrical Plan for Commercial / Industrial buildings.

• Designed lighting, communications, power distribution system for commercial (offices, etc.,) and Industrial buildings.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers.

• Installing sub-stations

• Microcontroller Based Smart Security System

• Expert in compliance with codes and safety issues.

 
Md. Rakibul Hasan- Electrical Engineer

• B. Sc. Engineering (Electrical), BUET (Bangladesh University of Engineering & Technology.

• Specification writing, equipment selection and vendor interface

• Electrical Service design of multistoried building.

• Electrical load calculation, designing of power structure.

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers

• Installing sub-stations

• Expert in compliance with codes and safety issues.

 
Mouniul Islam- Electrical Engineer

• B. Sc. Engineering (Electrical), BUET (Bangladesh University of Engineering & Technology.

• Specification writing, equipment selection and vendor interface

• Electrical schematic drawing/design for commercial / industrial building.

• Electrical load calculation, designing of power structure.

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers

• Installing sub-stations

• Expert in compliance with codes and safety issues.

 
Sunjida Afrin- Electrical Engineer

• B. Sc. Engineering (Electrical), BUET (Bangladesh University of Engineering & Technology.

• Design electrical wiring, lighting system, grounding and backup generator for multistoried building.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Installing Transformers

• Installing sub-stations

• Expert in compliance with codes and safety issues.

 
Araf Hossain- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Design electrical wiring, lighting system, grounding and backup generator for multistoried building.

•  Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Expert in compliance with codes and safety issues.

 
 
Sadia Zafrin Naomi- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Design electrical lighting system, grounding and backup generator for commercial/industrial buildings.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Electrical services design: Electrical wiring, Telephone System & LAN systems.

• Expert in compliance with codes and safety issues.

 
Tanvir Ahmad- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Electrical services design: Electrical wiring, Telephone System & LAN system of a corporate office.

• Design lighting system, grounding and backup generator for multistoried building.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Installing sub-stations

• Expert in compliance with codes and safety issues.

 
Tanvir Hossain Galib- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Design electrical wiring, lighting system, grounding and backup generator for multistoried building.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Expert in compliance with codes and safety issues.

 
 
Tanvir Mustafa- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Design electrical wiring, lighting system, grounding and backup generator for multistoried building.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Worked on fire and electrical safety assessment project under ILO (International Labor Organization) and BGMEA (Bangladesh Garments Manufacturers and Exporters Association) Security System Design (CCTV, door counter, integrated remote monitoring etc.)

• Testing the load capacity of the Main Switch Board.

• Expert in compliance with codes and safety issues

 
Tanvir Hossain Galib- Electrical Engineer

• B. Sc. Engineering (Electrical & Electronics), BUET (Bangladesh University of Engineering & Technology.

• Design electrical wiring, lighting system, grounding and backup generator for multistoried building.

• Electrical load calculation, designing of power structure.

• Specification writing, equipment selection and vendor interface

• Worked on Security System Design (CCTV, Fire safety, door counter, integrated remote monitoring etc.)

• Automatic Short Circuit Tester.

• Testing the load capacity of the Main Switch Board.

• Expert in compliance with codes and safety issues.

erviceAudit

Background | Mission & Vision | Compliance & Integrity | Executive Team | Career | Contact Us